Comments on: IOM fin and rudder moulds http://www.anderswallin.net/2008/06/iom-fin-and-rudder-moulds/ Wed, 07 Jan 2009 19:47:15 +0000 http://wordpress.org/?v=2.6.3 By: Administrator http://www.anderswallin.net/2008/06/iom-fin-and-rudder-moulds/#comment-44895 Administrator Tue, 29 Jul 2008 07:16:05 +0000 http://www.anderswallin.net/?p=464#comment-44895 Hi Lincoln, The longest movement of the machine is around 500mm along the X-axis. If you want a mould longer than that we would have to cut one end of the mould first and then re-position the mould to cut the other end. There will be a visible seam between these two parts but it will likely be below 0.1 mm in height and have nor effect on performance. If you send me a design in DXF or IGES format I can look at it and estimate time/cost. We ask around 500 euros for an IOM fin mould so a longer one would be slightly more. Anders Hi Lincoln,

The longest movement of the machine is around 500mm along the X-axis. If you want a mould longer than that we would have to cut one end of the mould first and then re-position the mould to cut the other end. There will be a visible seam between these two parts but it will likely be below 0.1 mm in height and have nor effect on performance.

If you send me a design in DXF or IGES format I can look at it and estimate time/cost. We ask around 500 euros for an IOM fin mould so a longer one would be slightly more.

Anders

]]> By: lincoln http://www.anderswallin.net/2008/06/iom-fin-and-rudder-moulds/#comment-44886 lincoln Tue, 29 Jul 2008 05:15:08 +0000 http://www.anderswallin.net/?p=464#comment-44886 Can you cnc M foil mould for me? I am in Melbourne Australia. Lincoln Can you cnc M foil mould for me?
I am in Melbourne Australia.
Lincoln

]]>